Raspberry Pi Case for 5-inch HDMI Touchscreen

This is a case for the Raspberry Pi 3 (Model B or B+) with a 5-inch resistive touchscreen sold on Amazon under various names, including [Kuman](https://www.amazon.com/dp/B07QB2FGSL) and [Elecrow](https://www.amazon.com//dp/B013JECYF2). The touchscreen connects to the Pi through the GPIO header and a small HDMI jumper board (see photo 2 and 3). Touchscreens using the Pi's display connector will not fit. (Try [this one](https://www.thingiverse.com/thing:4055409) instead.) Note: Some photos are from earlier versions of the case. ## Components * `Case5-Box-v3.stl` - The basic container. * `Case5-Box-SH-v3.stl` - Container with built-in stylus holder. * `Case5-Faceplate-v2.stl` - The faceplate for all four containers. * `Case5-Bumper-5mm-v2.stl` - A 5mm bumper (foot) to make room for airflow under the case when using a cooling fan. You will need four. * `Case5-Bumper-2mm-v2.stl` - A thin 2mm bumper. You will need four if you do not install a fan. * `Case5-Bumper-8mm-v2.stl` -