Anet A8 Titan extruder and V6 Hotend mount. (Volcano too)

I got the idea from NieLX for the mount and Isograph for the fan mount. Big thanks guys. The main goal was to make it so I could assemble the hot end and then mount it to the printer. These things are kind of tricky if you haven’t ever done it. And bench assembling it is WAY easier. I also wanted to turn the extruder 90 degrees, so I could see it better. There’s spinny wheel things in it and I’m easily amused….. I also wanted to get the fan to not be mounted on the gear box and be a little more easily printable. I drew up mounts for different auto level sensors. One for the little square SN04-N prox (yes, the one no one likes but people still use.) A mount for a BLTouch. And a mount for the round tube type prox switches. The mounting hole in the bracket is 16mm. The stock screws were to short and I didn't have the right size. So I used 3mm screws to mount all the brackets. They fit through the stock mounting holes and you can put a nut on the back. The offset for the