Press mold for microUSB type B like Г UP

This molds for molding micro USB type B like Г upper plug connetors. I'm use hot glue with hot glue pistols for made this connectror. And i have best quality with layer thickness - 0,1 mm nozzle diameter - 0.5 mm Maybe if u use 0.05 mm layer thickness u have better quality Before pouring hot glue lubricate the form of motor oil or Vaseline. After pouring wait 30 min and open the form/ How to use these forms: 1 - First of all - print out, the thickness of the layer should be from 0.05 mm to 0.1 mm, the nozzle with a diameter of 0.5-0.4 mm (well, or a cnc drill with a metal cut) 2 - Solder the connector with wires according to the power scheme of your gadget 3 - Lubricate the mold with petroleum jelly or clean engine oil 4 - Insert the soldered connector into one part of the mold, cover the second 5 - Drag the rubber band for banknotes or tie it with thread so that it does not open 6 - Preheat the glue gun 7 - Using a gun to extrude the hot glue into the molds 8 - Allow t