Filament Dry Box

Filament Dry Box Used some parts from others and made some modifications. Added a 'bump' to the 1/2" PVC pipe bracket from SinfoniaSam to make the PVC pipe snap into position and not move. Created an inner grommet w/ a funnel to facilitate threading the filament through when you can't see what your doing. The outer & inner grommets are based off of Bummster's designs. This is the tote that I used. It was around $30 at Target. http://sterilite.com/mobile.html?id=930&ProductCategory=251§ion=1 1/2" PVC Pipe (50cm long was a perfect fit) A 'Wet Erase' Marker for labeling the filaments and various printer settings for best results when using that particular filament. These markers are nice as they can be erased with a damp paper towel but are not easily erased by accidentally rubbing against it. I velcro'd the pen to the lid to always have it handy. Hardware Used: M3 10mm Bolts (x32) M3 Nylon Lock Nuts (x32) Tools Used: Drill w/ small bit for pilot holes.