8up Shotgun Shell Caddy

UPDATE 4/18/2017 I have gone through a couple revisions of this. The current version is rev3, which is making much better use of space and leaving a much smaller footprint. I also uploaded the .iges files so if anyone would like to modify them they can. This is my try at a shotgun shell caddy, as used by many multi-gun competitors. This is not to be used for commercial purposes. You will need: 8 - M4x20mm Machine Screws 8 - M4 Nuts 4 - 1/2"x 1/16" magnets (http://www.kjmagnetics.com/proddetail.asp?prod=D81-N52) 1 pack of rubber bumpers (http://www.mcmaster.com/#9310k12/=13rn8to) 1 TekLok mount (if that is what you want to use) Super Glue 3D Printed Parts: Material: ABS One of each: 8_up_body, 8_up_front, 8_up_back Layer Height: 0.2mm Infill: 30% Shell thickness: 1.0mm Bottom/Top thickness: 1.0mm Instructions: - Print the parts. - Press the M4 nuts into the slots, you may need to use a hammer and a punch to tap them in to place. - Glue the magnets