Mini Toolbox - chocolate holder

ABOUT ====== This is a toolbox that can hold chocolate balls or lollies. Makes a nice presentation box. INSTRUCTIONS ============ To make, you need to print: 1x Base 2x Drawer 4x Choc Insert 4x Long Rod 8x Short Rod 2x Lid 2x Handle 28x Snap-plugs 1. Put 2 choc holders in base. 2. Load a choc holder into each drawer. 3. Attach rods to ends drawers and hold in place with snap-plugs. 4. Attach rods drawers to base with snap-plugs in the rods. 5. Attach lid using snap-plugs. 6. Pop in handles into lids. CHANGELOG =========== 18/12/2015: Added Washer part - because I ran out of M3 washers. I'm thinking it may be possible to make a snap-in part rather than use screws and nuts. Some testing required. 19/12/2015: Updated Choc Insert so it can be printed more easily - bottom of hemispheres held together before they're joined. 20/12/2015: Added Snap-plugs. This removes need for any hardware (was using M3 nuts, washers and bolts). Model is now completely 3D