Simracing Drift DIY hydra e-brake

I slightly redesigned the original ebrake but also added a different spring for me orange/yellow spring Stuyo used was too stiff, so I added a different spring. You can find some on Aliexpress with an outer diameter of 13mm, an inner diameter of 10mm, and a length of 20mm. Also you will need extra hardware than Stuyo used,  2x screw M3 12mm, 1x screw M3 14mm I think, 3x M3 hex nut. Original hardware and instructions you can find here (https://www.diy-sim.com/sim-projects/sim-gear/item/easy-diy-h