Tools for Fiat 500e CV joint and gearbox

Some tools I came up with pulling and inspecting my gearbox and cv joints on my 2018 fiat 500e. 1) A 36mm (~slightly undersized) hex that fits over the splines on the input shaft of the gearbox. It just pushes on.2) A ½" drive plate for turning either output cup of the differential. You can use bolts from the axles to hold this on, I used two.3) A little nub you can slide on to the CV joint shaft to let you hammer away. This prints with 100% infill. Use impact resistant material(tough P