Glider fpv pod for Eclipson Glider by Pauldrones

To assemble the Pod we will follow the steps below: - We will drill a 6mm hole in the center of the fuselage about 3cm from the cockpit lock (photo 0) and use as a guide the TPU inner mast with the 6 x70mm tube inserted and thus make the two 1.5mm holes that are to fix the unit (F 10). - To the base (in principle the one with the camera at 16mm from the front end F1) we screw the external mast (F2) and pass the cables, if they are already soldered to the Air Unit we will have to re